Locknut vs checknut vs lockring: which one do you need?
All four lock a conduit, fitting or cable gland to a box or panel. They differ in shape, material, size system and finish. Pick by the conduit size system you use (metric or inch), how much grip you need and where the joint will be installed.
Buyer guide · Vanessa International, conduit fittings manufacturer, Aligarh
What each part does
A locknut screws onto the threaded end of a conduit, connector or cable gland from inside a box and pulls it tight against the wall, so the joint cannot work loose. A checknut is the same idea, and in India the two names are often used for the same hex nut. A lockring is a thinner threaded ring with a milled (serrated) outer edge, used where space is tight or where a hand-tightened grip is needed.
Side by side
| Part | Shape | Material and finish | Our sizes | Typical use |
|---|---|---|---|---|
| MS locknut (galv locknut, checknut) | Hex nut | Mild steel, galvanised | 16 mm to 63 mm | Metric conduit and cable glands in boxes and panels |
| Conduit locknut | Hex nut | Zinc plated | ½″ to 2″ | Inch conduit and connectors in enclosures |
| GI checknut | Hex nut | Galvanized iron | ¾″ to 2″ | Threaded GI conduit and fittings, damp locations |
| Milled edge lockring | Thin ring, milled edge | Galvanised | 20 mm to 50 mm | Low-profile locking in panels and tight boxes |
How to choose
- Metric conduit or cable glands (mm): use an MS locknut (16 mm to 63 mm) or a lockring (20 mm to 50 mm).
- Inch conduit: use a conduit locknut (½″ to 2″) or a GI checknut (¾″ to 2″).
- Damp or outdoor locations: choose a galvanised or zinc plated finish for corrosion resistance.
- Tight space inside the box: a lockring takes less depth than a hex locknut.
- Match the thread: the nut must match the thread on the conduit or gland, whether Metric, BSP, NPT or another standard. See our thread standards guide.
What to send for a quote
- Part type and size, in mm or inches
- Thread standard and, for metric threads, the pitch
- Finish: galvanised, zinc plated or other
- Quantity, and delivery city or destination country
Not sure which part you have? Send a photo or a sample and we will identify it.
Questions buyers ask
Is a checknut the same as a locknut?
Often, yes. In India, MS locknut, galv locknut and checknut are commonly used for the same mild steel hex nut. A GI checknut is the galvanized iron version made in inch sizes.
When should I use a lockring instead of a locknut?
Use a lockring where there is little depth inside the box or panel, or where a milled edge helps you tighten it by hand or with a tool.
Which locknut fits a 20 mm conduit?
A 20 mm MS locknut or a 20 mm lockring, with the same thread as your conduit or gland.
Get a price for conduit fittings
Send us your requirement and we reply with price and lead time:
- Item and sizes
- Thread standard (Metric, BSP, NPT or ASTM) and finish
- Quantity
- Delivery city, or destination country and port for export
MS locknuts
Conduit locknuts
GI checknuts
Lockrings