Conduit fitting threads explained: Metric, BSP and NPT
A locknut, coupler or socket only works if its thread matches the conduit or gland it goes on. The thread depends on the market and the type of conduit. Tell your supplier the standard and size, and the parts will fit first time.
Buyer guide · Vanessa International, conduit fittings manufacturer, Aligarh
The common thread systems
| Thread | How it is written | Sizes in | Taper | Where it is common |
|---|---|---|---|---|
| Metric | M20 × 1.5 (diameter × pitch) | mm | Parallel | Metric conduit and cable glands: Europe, India, many export markets |
| BSP | Inch size, e.g. ¾″ | Inches | Parallel or tapered | GI pipe and conduit: UK, Gulf, Africa, parts of Asia |
| NPT | Inch size, e.g. ¾″ NPT | Inches | Tapered | Rigid conduit and pipe: USA, Canada |
| EMT | No thread on the tubing | Inch trade sizes | None | Thin-wall conduit: USA, Canada and other markets using US standards |
Metric threads
Metric conduit and cable gland threads are written as M, the outside diameter in mm and the pitch, for example M20 × 1.5 for 20 mm conduit. Metric conduit sizes such as 16, 20, 25, 32, 40, 50 and 63 mm are common in Europe, India and many export markets. Our MS locknuts are made from 16 mm to 63 mm with metric threads as standard.
BSP threads
BSP (British Standard Pipe) threads are sized in inches and come in a parallel form and a tapered form. They are used on GI pipe and conduit in the UK, the Gulf, Africa and parts of Asia. If your conduit is GI pipe, tell us whether it has a parallel or tapered thread.
NPT threads
NPT (National Pipe Taper) is the tapered pipe thread used in the USA and Canada, including on rigid steel conduit. Fittings for these markets must be cut to NPT, not BSP: the two look similar but do not seal or fit properly together.
EMT has no thread
EMT (electrical metallic tubing) is thin-wall tubing with no thread. It is joined with set screw or compression fittings, such as our EMT set screw connectors and couplings. Only the box end of an EMT connector is threaded, to take its locknut. See our EMT fittings guide.
How to tell which thread you have
- Measure the outside diameter of the threaded end.
- Check the pitch with a thread gauge, or count threads per inch.
- Check whether the thread tapers toward the end.
- If unsure, send us a sample or a clear photo with a ruler beside it.
Questions buyers ask
Can BSP and NPT fittings be used together?
No. They have different thread angles and pitches in many sizes, so they do not fit or seal properly together. Order the thread your conduit uses.
Do you make fittings in all these threads?
Yes. We cut Metric threads as standard and BSP or NPT threads to order. Tell us the standard and size when you ask for a quote.
What does M20 × 1.5 mean?
A metric thread with a 20 mm outside diameter and a 1.5 mm distance between threads.
Get a price for conduit fittings
Send us your requirement and we reply with price and lead time:
- Item and sizes
- Thread standard (Metric, BSP, NPT or ASTM) and finish
- Quantity
- Delivery city, or destination country and port for export
MS locknuts
Conduit couplers
Conduit locknuts
GI checknuts